Olympus CLV-160, Инструкция по эксплуатации

Страница: 17 / 68

Chapter 3 Installation and Connection
13
EVIS EXERA XENON LIGHT SOURCE CLV-160
Chapter 3 Installation and Connection
• Turn OFF all system components before connecting them.
Otherwise, equipment damage can result.
• Use appropriate cables only. Otherwise, equipment damage
or malfunction can result.
• Use the light source under the conditions described in the
“Operating environments” and the “Specifications” in the
Appendix only. Otherwise, improper performance,
compromised safety and/or equipment damage may result.
Prepare the light source and compatible equipment (shown in the “System chart”
in the Appendix) before each use, and refer to the instruction manuals of each
system component. Install and connect the equipment as follows:
3.1 Installation of equipment
• Do not place any equipment other than the EVIS video
system center or OES video system on the top of the light
source. Otherwise, equipment damage can result.
• Keep the ventilation grills of the light source clear. Blockage
can cause overheating and equipment damage.
• Place the light source on a stable level surface, using the foot
holder (MAJ-878).
• If no mobile workstation (WM-30, WM-N60) is used, confirm
that the light source does not exceed the allowed maximum
load of the installation site.