Connecting the camera to a computer
164
9
Co
nn
ect
ing t
h
e
ca
me
ra to a computer
Macintosh
1
Insert the CD-ROM into the CD-ROM
drive.
• The CD-ROM window is displayed.
• If the CD-ROM window is not displayed,
double-click the CD-ROM icon on the
desktop.
2
Double-click on the desired language
folder.
3
Double-click the “Installer” icon.
• The OLYMPUS Master installer starts up.
• Follow the on-screen instructions.
• When the OLYMPUS Master licensing agreement is
displayed, read the agreement and click “Continue” and
then “Agree” to proceed with the installation.
• The screen confirming that installation is completed is displayed.
4
Click “Finish”.
• The first screen is displayed.
5
Click “Restart”.
• The computer restarts.
• Remove the CD-ROM from the CD-ROM drive and store it.
Use the USB cable provided with the camera to connect the camera to
your computer.
1
On the camera, set [USB] to [PC].
g
“USB” (P. 134)
2
Plug the USB cable into the USB port on the computer.
• Refer to your computer’s instruction manual to locate the position of the
USB port.
Connecting the camera to a computer
Mode dial