67
4
Ad
v
anced shooting
Remote control shooting
TIPS
•
If the camera’s self-timer/remote control lamp does not blink
after pressing the shutter button on the remote control.
T
The remote control may be too far away from the camera. Move
the remote control or change your position as necessary so that
the remote control signal can reach the camera, then press the
shutter button again on the remote control.
T
The battery in the remote control device is running low. Replace
with a new battery.
~
“How to replace the battery (CR2025) of
the remote control device” (P. 162)
•
If the remote control receiver is exposed to strong light, such as
direct sunlight, shooting may not take place, even if the remote
control is within the effective signal distance.
•
To shoot sequential shots using the remote control, press and hold the
shutter button on the remote control. If the camera does not receive
the remote control signal properly, sequential shooting may stop.
Note