147
Troubleshooting
10
Miscellaneous
Possible cause
Corrective action
Ref. Page
The picture is out of focus.
The monitor goes off.
The flash does not fire.
Position the camera more than
0.2 m/0.7 ft. from the subject and
take the picture. To take pictures
closer than 0.2 m/0.7 ft., use the
super macro mode.
Use focus lock to focus on the
subject and then shoot.
Wait until the camera dries before
turning it on again.
Operate the camera (press the
shutter button or the zoom lever).
If ALL RESET is set to OFF in
the MODE MENU, the camera
settings before the power was
turned off remain unchanged.
Turn on the monitor, and turn off
the power.
Select a flash mode other than
flash off
.
If you want the flash to fire on a
brightly illuminated subject, set
the flash to fill-in mode
.
If the flash is set to the red-eye
reduction or
Slow
synchronization with red-eye
reduction
SLOW
, the flash
does not fire in the BKT mode. Set
DRIVE to any mode other than
BKT.
The flash does not fire in the
mode. Set a different
shooting mode.
P. 63, 64
P. 46
—
P. 22
P. 41, 103
P. 55
P. 55
P. 68
P. 35
The subject is too close.
Auto focus is not possible.
There is condensation* on
the lens.
The camera is in the sleep
mode.
The power is turned off
with the monitor off.
The flash is set to the flash
off mode
.
The subject is illuminated.
DRIVE is set to BKT.
The camera is in the
(movie) mode.
