Connecting the camera to a printer
130
9
Direct printing
(PictBridg
e)
1
Turn the printer on and plug the printer end
of the USB cable into the printer’s USB
port.
●
For details on how to turn the printer on and
the position of the USB port, refer to the
printer’s instruction manual.
2
Plug the USB cable into the camera’s USB
connector.
●
The camera turns on automatically.
●
The camera’s monitor turns on and the
selection screen for the USB connection is
displayed.
3
Press
to select PRINT, then press
.
●
ONE MOMENT is displayed and the camera
and printer are connected. The PRINT
MODE SELECT screen is displayed on the
monitor. Make the print settings on the
camera’s monitor. Go to “Printing pictures”
(P. 131).
Use the USB cable provided to connect the camera to a PictBridge-
compatible printer.
P C
EXIT
USB
•
If PC is selected in step 3, the PRINT MODE SELECT screen is not
displayed. If the screen is not displayed after several minutes, unplug
the USB cable from the camera and start again from step 1.
Note
USB connector