Olympus AFU-100, Инструкция по эксплуатации

Страница: 18 / 36

Instructions for Use EN Olympus AFU-100
18
WB135745-W10
6.3 Connection to an AC mains power supply
1) Confirm that the power of the peristaltic pump unit is off.
2) Connect the power cord to the mains connector (18) of the peristaltic pump unit
(see fig. 6.2).
3) Connect the power plug of the power cord directly to a grounded wall outlet which
meets the power requirements indicated on the electrical rating plate on the rear
panel of the peristaltic pump unit.
Fig. 6.2: Connection of the power cord
DANGER Connect the power plug of the power cord directly to a grounded wall
outlet or to a multiple power socket outlet equiped with an insulating
transformer of protection class I, conforming to IEC 60601-1. The
multiple power socket outlet shall conform with the requirements of the
IEC 60601-1-1 standard. In this case, observe the maximum permitted
current or power loading of the multiple power socket outlet and the
insulating transformer.
CAUTION Always use the power cord provided with the peristaltic pump unit or a
cable of similar quality (see chapter 11.2, Technical data). Never
attempt to modify the power cord.
Firmly plug in the power cord so it will not accidentally be dislodged
during the operation.
If the same circuit breaker is used to supply power to other electrical
equipment, carefully consider the power requirements of the additional
equipment and use circuit breakers that have ample capacity.
Otherwise, the peristaltic pump unit does not work correctly.
Portable multiple power socket outlets must not be placed on the floor.
Do not use an additional extension cable or other multiple power socket
outlets that are not expressly approved by the manufacturer for joint
use.