Olympus AFU-100, Инструкция по эксплуатации

Страница: 17 / 36

Olympus AFU-100 EN Instructions for Use
WB135745-W10
17
6.1 Installation of equipment
CAUTION Install the unit on a stable, level surface. Otherwise, the unit could fall,
causing equipment damage and / or injury to the user or patient.
If the peristaltic pump unit is placed on a cart, the cart must be of
adequate strength and size to hold the unit securely.
Never place the peristaltic pump unit on its side or upside down.
Otherwise, the peristaltic pump unit may not work correctly.
If the peristaltic pump unit is lifted up, do not hold the unit at the fuse
holder at the rear panel to prevent damage of the unit.
NOTE Place the instructions for use near the peristaltic pump unit or in another
easily accessible place.
Before using an optional item, thoroughly review and understand the
instructions for use provided with that item and check the compatibility
with the peristaltic pump unit.
Specifications, design and accessories are subject to change without
any notice or any obligation of the manufacturer.
6.2 Connection / disconnection of pump head
Connection of pump head
1) Engage the pump head drive slot with the end of the pump drive shaft
(approximately 45° position, see fig. 6.1). Continue to align the pump head until the
bayonet engages with the mounting plate. Ensure that the arrow on the front of the
pump head is pointing to the left side.
2) Turn the pump head clockwise until it locks into an upright and secure position.
Disconnection of pump head
1) Push the locking lever (see fig. 6.1) back and turn the pump head counterclockwise
until it is free from the mounting plate.
2) Remove the pump head.
Fig. 6.1: Connection / disconnection of pump head
Locking lever