22
How to use this manual
This sample page is only for your reference. It may differ from the actual
page in this manual.
4
Fl
as
h
Flash intensity control
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting the light
emission. Examples include small subjects, distant backgrounds, or
situations when increased contrast is desired.
1
Adjust the brightness by turning
the control dial while holding
down
#
and
F
at the same time.
• The exposure value is displayed on
the control panel while the flash
intensity control function is set.
TIPS
• The flash intensity can be set in 1/3EV steps or 1/2EV steps
Mode dial
Control dial
#
Flash mode
button
F
Exposure compensation
button
Turning to the left
decreases the light
emission.
Min. setting is –2.0.
Turning to the right
increases the light
emission.
Max. setting is +2.0.
Set the mode dial to any of the marks shown here.
The buttons for the
function and their
location are clearly
illustrated.
This shows control dial operations.
6
SHARPNESS
This function adjusts the sharpness of the image.
1
In the top menu, select MODE
MENU
→
PICTURE
→
SHARPNESS, and press
d
.
g
“How to use the menus” (P.49)
2
Press
ac
to adjust the
sharpness b5 and -5.
• To increase the sharpness (+) :
Press
a
. The image contours are
emphasized, making the image
appear sharper and more vivid. Use
Mode dial
Arrow pad
OK button
CARD
Et
CAM
PICtURE
SHARPNESS
CONtRASt
SAtURAtION
Follow the arrows to perform menu operations. For details on
operating procedures, see “How to use the menus” (P.49).
This represents the arrow pad. Only
arrows applicable to the operation
are shown.