35
Turning the power on/off
1
Ge
tt
in
g
st
ar
te
d
Startup/Shutdown screen
You can select a picture and sound so that when
the power is turned on/off, a startup/shutdown
image is displayed on the monitor and the
startup/shutdown sound is played (P.188). You
can register a picture for the startup/shutdown
screen (P.189) and adjust the volume of the
sound (P.187).
If the card is not recognized (card check)
When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.
• All data stored on the card is erased when the card is formatted.
Control panel
Monitor
indication
Corrective action
NO CARD
There is no card in the camera or the card is
not inserted properly.
→
Insert a card. If a card is already inserted,
remove it and insert it again correctly.
The card cannot record, play back or erase
pictures.
Replace the card. with a new one or format
the card.
→
Press
ac
to select POWER OFF, then
press
e
. Replace the card with a new
one.
→
Format the card.
Press
ac
to select
I
FORMAT, then
press
e
to display the confirmation
screen. Select YES and press
e
.
Formatting starts. If the card was
successfully formatted, the camera is
ready to take pictures.
Startup/Shutdown screen (Factory default setting)
POWER%OFF
FORMAt
CARD%SEtUP
SELECt
GO
Note