Olympus 227180, Инструкция по эксплуатации

Страница: 37 / 72

37 EN
Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions.
Menus for Other Camera Settings
The default settings of the function are highlighted in .
Erasing data completely
[MEMORY FORMAT]/[FORMAT]
E
SETUP MEMORY FORMAT/FORMAT
Before formatting, check that no important data
is left in the internal memory or card.
Non-Olympus cards and cards that have been
formatted by a computer must be formatted
with this camera before use.
Submenu 2 Application
YES
Completely erases the image data
in the internal memory
*1 or card
(including protected images).
NO Cancels formatting.
*1 Be sure to remove the card before formatting the
internal memory.
Copying images from the internal
memory to the card [BACKUP]
E
SETUP BACKUP
Submenu 2 Application
YES
Backs up image data from the
internal memory to the card.
NO Cancels the backup.
It takes some time to back up data. Check that
the battery has suf fi cient power before starting
the backup, or use a separately sold AC
adapter.
“Using an AC adapter (STYLUS-7020/
μ
-7020 only)” (p. 56)
Changing the display language [
W
]
E
SETUP
W
“Changing the display language” (p. 13)
Submenu 2 Application
Languages *1
The language for the menus and
error messages displayed on the
monitor is selected.
*1
The available languages vary depending on the country
and/or region where the camera was purchased.
Setting the startup display screen and
sound when the camera is turned on
[PW ON SETUP]
E
SETUP PW ON SETUP
Submenu 2 Submenu 3 Application
SCREEN
OFF No image is displayed.
1
A preset image *1 is
displayed.
2
A still image stored in the
internal memory or card is
registered for display. (This
option leads to the setup
screen.)
VOLUME
*2
OFF (No
sound)/LOW/
HIGH
The volume of the startup
sound is selected.
*1 This image cannot be changed.
*2
When [SCREEN] is set to [OFF], this setting is not
available.
To register a startup image
1 Select [2] in submenu 3 for [SCREEN] and
press the
E
button.
2 Use mn to select the image to be registered,
and press the
E
button.