Olympia CM 812 Скачать руководство пользователя

Страница: 8 / 50

Operating Instructions

CM 811/812 Cash Register

Operating Instructions

Olympia 8.2005

Page 8

Inserting a Paper Roll

Remove the printer cover. Pivot the paper transport unit up. Insert a thermal paper roll (57 mm in width and max. 70 mm

in diameter). Draw the leading edge of the paper over the tear-off edge and pivot the paper transport unit down, locking it

in place. Depending on the required use (bill or journal), either tear off the paper at the tear-off edge of the printer

mechanism or feed the paper onto the paper reel. Replace the printer cover.

3 Paper

Reel

The paper reel is required when the receipts need be rolled up on it.

1. Open the printer cover.

2. Open the battery compartment cover (black flap) in the paper compartment.

3. Thread the end of the journal paper into the slit in the paper reel.

4. Insert the paper reel into the reel guides.

5. To remove the journal paper after it has been rolled up on the reel, remove the

paper reel and pull the journal roll off.

6. Reinsert the paper reel.

7. Close the printer cover.

4 Inserting

batteries

Note:

Insert batteries to ensure that all data is retained in the event of a power failure.

1. Open the printer cover.

2. Open the battery compartment cover (black flap) in the paper compartment.

3. Insert 3 AA batteries.

Important: Pay attention to the correct positioning of the batteries
(refer to the diagram and/or the markings on the cash register).

4. Close the battery compartment cover.

5. Close the printer cover.

6. To ensure that no data is lost, replace the batteries once a year while the cash reg-

ister is switched on.

Содержание CM 812



















































Результаты поиска

Содержание CM 812

Отзывы:

Похожие инструкции для CM 812

Бренды по названию

Популярные бренды

Olympia CM 812, Руководство по эксплуатации

Результаты поиска

Содержание CM 812

Отзывы:

Похожие инструкции для CM 812

Бренды по названию

Популярные бренды