background image

- Turn off the machine by pressing switch 7 and unplug it, Turn on the steam 

tap 5, release  all the steam from the spout  14 of the steam pipe and then 

turn off the steam tap 5. 

- Remove the container under the lid 2, empty it and if necessary clean it as 

explained under the heading "CLEANING". Replace it, fill it to 3/4 with water 

and add a little decalcifying product which can be found on the market. 

- Unscrew the boiler cap 1 and insert the funnel d in the opening. Using the 

jug g pour in cold water checking at the same time that the water in the 

water level gauge 3 does not exceed the point indicated by the upper arrow 

as in the illustration. Then add the decalcifying product following the 

manufacturer's instructions. 

- Screw the boiler cap 1 back on tightly. Plug in the machine. Turn on the 

steam tap 5. Switch on the machine by pressing 7. As soon as steam is 

released from the spout 14 of the steam pipe, turn off the steam tap 5. Leave 

the machine on for about two or three hours. During this time turn on and off 

the steam tap 5 and the hot water tap 6 two or three times, placing the jug g 

under the respective pipes; also release a little water from the group 13 two 

or three times, putting the jug g under it and pressing the coffee switch 10. 

- Switch off the machine by pressing 7 and unplug it. Turn on the steam tap 

5, release all the steam and then turn off the steam tap 5. 

- Remove the container under the lid 2, empty it and rinse it. Replace it. 

- Unscrew the boiler cap 1, turn the machine upside down and let all the 

water out of the boiler through the hole under the boiler cap 1. Rinse the 

boiler thoroughly with cold water. 

- Repeat exactly the same procedure as indicated above but using only water 

WITHOUT the decalcifying product. 

- Follow the instructions given under the heading "STARTING PROCEDURE". 

- If the water in your area contains a lot of calcium, we recommend the use 

of non-sparkling mineral water. 

WE RECOMMEND that you keep the original packaging and use it to send the 

machine. 

We hope that these instructions will help you to use your machine correctly 

and and that you will now enjoy the taste of delicious coffees, "cappuccini", 

teas and other drinks of your liking. 

 

Содержание Caffarex









Отзывы: