background image

CLEANING 

- The container under the lid 2 can be taken out, Do so every now and then 

and clean it with water and a small brush. Use a decalcifying product if 

necessary. Rinse it thoroughly and replace it, making sure that the small 

filter fits into place well. If the container is properly in place, the lid 2 will 

close easily without having to be forced, When carrying out the cleaning it 

is important that the small filter on the inside of the base of the container 

does not get damaged. 

- The filter-holder 9 and the filters a + b must be cleaned frequently so that 

coffee deposits do not form inside the filter-holder and so that the holes of 

the filters do not get blocked (when looking against the light the holes 

should appear free). The filters a + b can also be cleaned in the 

dishwasher. 

- At least once a week place the jug g under the unit 13 without hooking on 

the filter-holder. Press the coffee switch 10 and release about a 14 of a 

jugful of water; then press the coffee switch 10 again. Remove the jug g 

and with a damp cloth wipe well inside the end of the unit 13, especially its 

crown. 

- About every six months clean the shower and the crown inside the unit 13. 

These two pieces are fixed by a screw that can be removed with a screw-

driver. If the screw is difficult to turn, give a couple of gentle taps with a 

hammer on the screw-driver handle. Separate crown and shower with a 

knife and clean both pieces with a needle, brush and washing-up liquid. 

Rinse the two pieces carefully and screw into place as before. 

SERVICE - REPAIRS - MAINTENANCE 

Even if you do not find any faults, have the machine checked in any case 

once every two years. During this check all the maintenance work necessary 

to keep it in perfect condition will be carried out. 

For these checks as well as for repairs and servicing, contact the factory, 

our representatives or our distributors from whom you bought the machine, 

always indicating in writing the faults found and if you wish to have an 

estimate. 

DECALCIFICATION 

The frequency of decalcification depends solely on the calcium content of the 

water in the area where the machine is used. 

We recommend that you have the decalcification done by our specialist staff. 

If however you prefer to do it yourself, follow these instructions: 

 

 

 

 

 

 

Содержание Caffarex









Отзывы: