manualshive.com logo in svg

OLT GS84-S, Инструкция по сборке

Поделиться
Скачать
OLT GS84-S Скачать руководство пользователя страница 21

38.

 Correctly orientate Left Side Roof Panel, with shingles overhanging plywood on the side of the 

shed and flush with plywood to the middle. Place on rafters with front of plywood just about flush with 
rafter ends but just slightly recessed. Doing so allows front facia to sit better.

39.

  For correct Roof Panel position, align panel so plywood sits evenly on Center Rafters. Complete 

both roof Panels.

40.

 With Roof Panels aligned, screw panels down to  center rafters with 

2 - 2 1/2” Screws

 in 

Bottom 

Row of Shingles Only (1 screw per panel).

Plywood flush 
with shingles 
on inside.

Rear of plywood 
1/8” recessed 
with rafter end.

Shingles overhang plywood on outside. 
Nailing strip to outside edge.

Roof Panel centered 
on rafter.

Push tight together.

Roof Seam.

Screw Bottom Row of 
Shingles ONLY for now. 
Screw on angle away 
from shingle edge to 
prevent it from cracking.

  Toll Free 1-888-658-1658              www.outdoorlivingtoday.com        [email protected]

Page 21

Содержание GS84-S





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды