8.
Position Plywood so it sits almost flush with outside of floor joist framing (see
Note
). When
correctly positioned, attach to all floor joists with 1 1/4” screws. Use screws every 16”.
B. Wall Section
Exploded view of all parts necessary to
complete the Wall Section. Identify all parts
prior to starting.
Wall Plate
9.
Locate 4
Solid Wall Panels
and 4
Wall Plates
(1 1/2” x 2 1/2” x 45 1/2”)
.
Attach Plates to
bottom of studs of each wall panel with 3 - 2 1/2” screws. Position so plates are flush with framing.
Note:
Plywood is cut slightly smaller than
floor framing. Keep plywood seams tight.
Important:
Pilot hole ALL 2x3 Wall
Studs with 1/8” drill bit prior to
screwing. This will make it much
easier to attached together.
Pilot Hole
first.
Angled Wall
Extenders (2)
Door Header
Solid Wall
Panel (4)
Wall Plate (4)
Window Wall
Panel
Door Jambs
Narrow Wall
Panel
Horizontal
Wall Cleats
Wall Extenders (2)
Top Triangular
Siding Pcs (2) L/R)
See Page 30 for
Optional End Door
Configuration.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 9
