29.
Attach
Horizontal Wall Cleats
(1 @ 3/4” x 3 1/2” x 70”, 1 @ 3/4” x 3 1/2” x 21”) to Wall Extender
bottom framing and Rear Wall top framing, so that cleat is flush with extender framing. There is a short
and a long wall cleat. Alternate alignment of screws, so half screw into Wall Extender Framing and half
into Rear Wall Top Framing. Use 8 - 1 1/4” screws.
C. Rafter and Roof Section
Exploded view of all parts necessary to complete the Rafter Section. Identify all parts prior to
starting.
Rear Soffits (2)
Rafters (6)
Front Soffits (2)
90° Metal
Bracket (8)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 16
30.
To complete Wall
Section
,
attach bottom 2x3
wall plates to plywood
floor with 20 - 2 1/2”
screws. Confirm Doorway
opening is 32” wide. Prior
to securing, make sure
wall panels are aligned
correctly on the floor.
Refer to
Step 11.
Wall
siding should overhang
floor while 2x3 wall plates
should sit
flush with floor.
Bottom W
all
Optional
- Caulking seams will help
prevent moisture from entering at
seam. Caulking not included in kit.
Confirm doorway opening is
32” wide at top and bottom.
