OLT 8x4 SpaceSaver Garden Shed Bevel Model with Plywood..., Инструкция по сборке

Страница: 4 / 34

Thank you for purchasing our 8x4 Bevel SpaceSaver Garden Shed.
Please take the time to identify all the parts prior to assembly.
Parts List:
A. Floor Section
1 - 45 ½” x 75” - Large Floor Frame (2 Joists unattached)
1 - 45 ½” x 21” - Small Floor Frame (2 Joists ATTACHED)
2 - 1 ½” x 3 ½” x 72” - Floor Joists
(Steps 1 - 2)
5 - 1 ½” x 3 ½” x 45 ½” -
Floor Runners
(Steps 3 - 5)
1 - 5/8” x 45 ½” x 75” -
Plywood Flooring
1 - 5/8” x 45 ½” x 21” - Plywood Flooring
(Steps 6 - 8)
B. Wall Section
4 - 1 ½” x 2 ½” x 45 ½” - Wall Plates
4 - 45 ½” x 75” - Solid Wall Panels
1 - 45 ½” x 75” - Window Wall Panel
1 - 12” x 73” - Narrow Wall Panels
(Steps 9 - 18)
1 - 2” x 3 ½” x 45 ½” -
Door Header - (Dado top edge)
2 - 3/4” x 3 ½” x 73” - Door Jambs - Vertical
(Steps 19 - 21)
2 -
Top Triangular Siding Pc for Angle Wall Extenders (L/R)
2 - 4
5 ¼
” - Angle Wall Extenders (L/R)
2 - 9” x 45 ½” - Wall Extenders
(Steps 22 - 28)
1 - ¾” x 3 ½” x 70” -
Horizontal Wall Cleat
1 - ¾” x 3 ½” x 21” - Horizontal Wall Cleat
(
Step 29-30)
C. Rafter & Roof Section
6 - 1 ½” x 2 ½” x 54” - Rafters
2 - ½” x 3 ½” x 48” - Front Soffit
2 - ½” x 3 ½” x 48” - Rear Soffit
1 - 3” x 2 ½” x 54” - Rafter - angle cut ends ( ¾ ” cleats attached
on sides)
(Steps 31 - 36)
2 - ¾” x ¾” x 51”
- Rafter/Facia Nailing Strips
4 - ⅝” (48” x 32” x 2pcs) + (48” x 21 ¾” x 2pcs) - Plywood for Roof
1 - ⅝” x 4” x 53 ¾” - Plywood for Roof
(Step 38-42)
D. Miscellaneous Section
(Skirting, Trim, Door, Facia & Misc. Parts
)
6 - ¾” x 4 ½” x 45
¼
” - Bottom Skirting (Bevel Siding)
(Steps 44 - 47)
8 - 7/8” x 2 ½” x 36” -
Corner Filler Trims
2 - 7/8” x 2 ½” x 10” - Rear Center Corner Filler Trims
(Steps 48 - 51)
2 - ½” x 3 ½” x 79” -
Vertical Door Trims
1 - ¾ x 1 ½” x 45
¼
” - Top Window Wall Trim
(Steps 51 - 53)
2 - ½” x 5 ½” x 79” -
Front Corner Trims
2 - ½” x 5 ½” x 88 ¾” - Rear Corner Trims
2 - ½ x 2 ½” x 80” - Side Front Corner Trims
3 - ½” x 2 ½” x 88 ¾” - Side Rear Corner & Middle Trims
(Steps 48 - 50, 54-57)
1 - 31
½”
X 72” -
Full Door
(Step 58-60)
1 - ½” x 1
¼
” x 32” - Above Door Trim
1 - ½” x 2 ½” x 7 ¾” - Narrow Wall Trim
(Step 61)
2 - ½” x 4” x 54 1/8” -
Side Facia (Angle Cut Ends) - reverse
4 - ½” x 4” x 50 ½” - Front and Rear Facia
(Steps 66 - 68)
2 - Detail Facia Plates (4” high)
(Step 65)
1 - ½” x ½” x 32” -
Upper Hor. Door Stop
4 - ½” x ½” x 36 1/4” - Vertical Door Stops
(Steps 66 - 67)
1 Aluminum Window Insert
(Steps 68 - 69)
Window Trim Pkg
1 - 24 1/16” angle cut / 3 - 23” Straight Cut -
Window Trim Kit
(Steps 70)
1 Flower Box Kit
(Steps 71-72)
1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall
panel siding is damaged or to shim floor or door.
Optional Pieces - When Door configured on end.
1 - 1 ½” x 3 ½” x 73” - Optional Door Jamb
1 - ½” x 2 ½” x 79” - Optional Vertical Door Trim
(Optional - Steps 74 - 77)
Note: All Trim, Facia and Bottom Skirting pieces will be positioned rough face out when installed.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 4