21
Heating during the transition period
Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much de-
pends on the external temperature. Therefore, if the exter-
nal temperatures are high (above 16°C) the delivery pres-
sure can be disrupted.
What to do?
●
Open the combustion air slide valve complete.
●
Only put on a small quantity of fuel.
●
Frequently stoke the ash.
Cladding
●
The cladding may not be overheated, as cracks could
appear.
●
Use a maximum of 3 kg wood or briquette for heating.
●
As the natural cladding comes from a „grown“ boulder,
structure and colour scheme may be very different.
●
The surface may be altered under temperature
influence.
Special information
The manufacturer’s guarantee expires if the stove is sig-
nificantly or permanently overloaded above the nominal
heating output, or if fuels other than those listed are used.
●
The stove must only be used with the combustion
chamber door shut.
●
Never remove hot ashes. Only store ashes in a fireproof,
non-combustible container.
●
Attention:
The surfaces get hot! Always use the en-
closed glove when operating the stove.
●
Convection air openings may not be covered.
●
Never use white spirit, benzene or other inflammable,
hazardous materials to ignite the fire.
●
The combustion air supply fittings must never be al-
tered. In particular, it must be ensured that any neces-
sary combustion air pies are open while the fireplace is
being used.
●
Do not make any changes or modifications to the stove.
Cleaning
What?
How often?
Using what?
inside of stove
at least 1 x per year
hand brush,
vacuum cleaner
connection piece
at least 1 x per year
hand brush,
vacuum cleaner
glass panel
as required
when cold
using glass cleaner for
stoves- and oven glasses
painted surfaces
as required
when cold
with a slightly damp microfibre cloth
