Olsberg Orayonne, Инструкция по эксплуатации

Страница: 21 / 88

21
Manufacturing state, packaging and recycling
The glass radiation heaters are packed together with the pre-assembled wall mounting kits, facilitating
handling and transport.
The delivery includes:
1x glass radiation heater
1x wall bracket
1x bag with small parts (see Fig.2)
- 4 hex head screws 6x60
- 4 washers D6.4
- 4 wall plugs S8
- 4 dummy plugs
- 2 cover caps
- 2 Hexagon socket head screws M6x65
- 2 spacers 30 long
1x power cable, 1m with plug connector
Fig.2
Due to the evaporation of unused material, an odour may develop when first starting the heater. For this
reason, ventilate thoroughly when first heating up the appliance.
Packaging and equipment components have been appropriately marked where possible and as
required by the applicable regulations, in order to facilitate subsequent separation for recycling and
proper disposal.
Caution: Packaging material, replacement parts and any old appliances or components to be scrapped
must be properly disposed of.
Disposing of the old appliance
In many cases, old electrical and electronic appliances still contain valuable materials.
However, they can also contain harmful substances which were necessary for the
appliances' functionality and safety. These substances can be environmentally harmful if
disposed of as residual waste or improperly handled. Please help protect our environment!
Never dispose of your old appliance as residual waste. Dispose of your old appliance in
accordance with locally applicable regulations.