Olivetti Olibook P1500, Руководство пользователя

Страница: 26 / 144

1 - 8 Operating System Setup
Quick Start Guide
I
Operating System Setup
If you are installing new system software, or are re-configuring your computer for a different system, make sure you
configure the appropriate OS setting in the BIOS before installing a new operating system (
Note
: If you have
installed the Windows Vista operating system with
AHCI
mode enabled,
DO NOT
disable AHCI mode or you will
need to reinstall the Windows Vista OS).
1. Start-up the computer and press
F2
to enter the
BIOS
.
2. Go to the
Advanced
menu, select
Installed O/S
and make sure the appropriate operating system is
selected.
3. Go to the
Exit
menu and select
Exit Saving Changes
(or press
F10
) and press
Enter
to exit the BIOS and
reboot the computer.
Figure 2
- BIOS (Operating System Selection)
Main Advanced Security Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Advanced
Select the operating
system installed
on your system which
you will use most
commonly.
Note: An incorrect
setting can cause
some operating
systems to display
unexpected behavior.
PhoenixBIOS Setup Utility
Installed O/S: [ VISTA ]
SATA Mode Selection: [AHCI]
Legacy USB Support: [Enabled]
Boot-time Diagnostic Screen: [Enabled]
Power on Boot Beep [Disabled]
Battery Low Alarm Beep: [Disabled]
Only available if Windows Vista
is selected as the O/S.
SATA Mode Selection
Make sure that you have selected the appropriate
SATA Mode Selection
for your hard disk. If you
have installed the Vista O/S with
AHCI
or
IDE
mode selected, do not change the setting (othe-
rwise you will need to reinstall your O/S).