37
SET 347 - RESET BCR PLU DATA
Code 347 restores the cash register with the data relative to the PLUs accessed via the
barcode reader and set up by the user. The data is read from a USB pen (the data restored is
that saved using code 345).
Note:
when the data of PLUs accessible via barcode reader is restored, the previous PLU
data on the cash register is lost without possibility of retrieval.
Operating procedure
1.
Insert the USB key into the cash register.
Note:
if you try to restore the data without having inserted the pen,
an error is displayed “STICK NOT INSERTED”.
Note:
before proceeding it may be necessary to print the
Management reports indicated by the cash register. If the
reports are not executed it will not be possible to proceed
with the restore.
2.
Set the register to configuration mode
.
3.
.
3
.
.
4
.
.
7
.
.
X
.
On the screen, the message appears:
“347-READING DATA/WAIT” and reading of the data starts.
During this phase, the following conditions could occur:
c. If reading of the data on the pen completes successfully, the
message is displayed:
“READING EXECUTED/REMOVE STICK”.
d. If, during reading, errors are encountered, the following error is
displayed:
“READ ERROR/REMOVE STICK”.
Note:
Try repeating the procedure, making sure that the pen is
inserted correctly. If the error re-occurs, contact Technical
Services.
4.
When the procedure terminates, the register prints a ticket with the
header “347- DATA READING”.
The ticket is saved in the EJ.
5.
Remove the pen.
When the USB pen is removed, the register positions automatically
at the beginning of configuration mode, displaying the message
“SET/0”.
Содержание NETTUNa3000
Страница 1: ...PROGRAMMING USING SET CASH REGISTER NETTUN 3000int l ...
Страница 6: ......
Страница 104: ...Code 578204gb ...
