Olivetti JET-LAB 600@, Руководство пользователя

Страница: 66 / 130

F
ACSIMILE
51
Changing the ring volume ...
If you wish, you can also change the ring volume as
follows:
1.
Ensure that the display shows the initial waiting
mode and the date and time.
FAX/PHONE 100%
28-10-99 16:28
2.
Press the FUNCTION key.
1.MEMORY TX
/1-9
3.
Press 8 on the numeric key pad.
8.SETUP
/1-9
4.
Press the START key:
DATE AND TIME
5.
Press the FUNCTION key.
VARIOUS SETTINGS
6.
Press the START key until the display shows:
RING VOL.:LEV.4
7.
Press the
#
available: “RING VOL:NO”, “RING VOL.:LEV.5”,
“RING VOL.:LEV.6”, “RING VOL.:LEV.7”, “RING
VOL.:LEV.8”,
“RING VOL.:LEV.1”, “RING
VOL.:LEV.2”, “RING VOL.:LEV.3”.
RING VOL.:LEV.2
8.
Press the START key to confirm this choice, then
press the STOP key to return the fax machine to
the initial waiting mode.
FAX/PHONE 100%
28-10-99 16:28
Recognising ring tones ...
In some countries it is possible to assign two or more
numbers to the same telephone line corresponding
to different users. When a call is made, a different ring
will indicate which user should reply.
This feature is very useful in a domestic or small office
environment where the telephone line is shared
between a number of people.
Your fax machine can “learn” one of these tones.
This way (in “FAX/PHONE” and “FAX/TAD” reception
mode) it will always prepare itself to receive a
document when the incoming call has this specific
tone. If, however, you pick up the receiver
immediately, you can talk to the caller, in the case of a
telephone call.
If the tone is not recognised, the fax machine will
continue to ring until you raise the receiver.
This feature is particularly useful when associated
with silent reception as the fax machine will only ring
for a telephone call.
For further information about access to this service,
contact the telephone network manager.
If an answering machine is connected to the fax
machine, we advise you to disconnect it before
activating the recognition procedure.
1.
Ensure that the display shows the initial waiting
mode and the date and time.
FAX/PHONE 100%
28-10-99 16:28
2.
Press the FUNCTION key.
1.MEMORY TX
/1-9
3.
Press 9 on the numeric key pad.
9.INSTALLATION
/1-9
4.
Press the START key:
TEL.LINE SETUP
5.
Press the FUNCTION key.
ENHANCED FEATURES