Olivetti JET-LAB 600@, Руководство пользователя

Страница: 128 / 130

M
AINTENANCE
113
ERROR CODES ...
The error codes are printed on both the transmission and activity reports and are represented by two digits indicating
the cause of the error. Due to limited space, only the code is indicated without any message on the activity report.
CODE ERROR CAUSE/SOLUTION
01 / 09 No document Document to be transmitted missing.
Place the document in the ADF.
02 Connection not possible No connection to the contact’s machine.
Check that your contact’s machine is connected, switched on and
free and that the number called is correct.
03 Recipient does not answer
Their machine is disconnected, switched off or busy.
Check that your contact’s machine is connected, switched on and
free and that the number called is correct.
04 Error during transmission Interference on the line or some other fault.
Try re-transmitting, starting from the page number indicated on
the transmission report.
05 Re-transmit pages: The pages indicated were not transmitted.
Reinsert the pages indicated into the ADF and re-transmit.
07 Document too long
The document does not comply with the format stated or exceeds
the maximum length permitted.
Set the document format correctly or repaginate it to fall within the
length permitted.
08 Check the document
Paper has jammed.
Remove the document or paper that has jammed and check that
documents in the ADF and paper in the ASF have been correctly
loaded.
10 Reception error Interference on the line.
Ask your contact to re-transmit the document.
11 Reception not possible Memory full.
Cancel excess documents from the fax memory.
13 Polling error The document has not been correctly recorded and/or there are
connection problems or interference on the line.
Make sure the document has been correctly stored and that the
machines are connected, installed, and correctly set.
14 TX/RX reserved Address not valid/ Transmission/reception operations are protected
by a password.
Check that the address is correct and/or that the correspondent
has created a confidential mailbox.
Type the password to continue the operation.
15 Number not enabled The number called has not been enabled.
Check the number you have dialled, and confirm it with the
contact to / from whom you wish to transmit / receive.
16 Power failure The power failed during a TX/RX operation.
21 Press STOP The operation in progress has been interrupted.
22 Engaged An engaged tone was received before or after the connection was
established.
Try re-transmitting.
23 Reception not possible Check that the machine is not in an error condition that prevents it
from receiving (e.g. no paper in ASF and memory full).