Olivetti Fax-Lab 220, Инструкция по эксплуатации

Страница: 35 / 52

29
O
UTGOING MESSAGE ONLY
Using this function, whenever an incoming call is received,
the TAD plays the OGM 1 but does not record any incoming
messages.
You can use this function when you expect to be away for a
long time and it would not be possible to record all mes-
sages received in your absence.
In this case, in place of the ordinary outgoing message, it is
advisable to record a different one, for example:
"From 22nd June to 19th September only faxes will be
accepted. No incoming messages will be recorded".
Until the display shows:
TAD SET-UP
Press the key and then the key until the display
shows:
ANNOUNCE ONLY
To confirm. The display shows:
ANNOUNC.ONLY:OFF
/ To view the other available option: "ANNOUNC.ONLY:ON".
To confirm your choice. The display shows:
LIFT HANDSET
If you have already recorded OGM 1, the display will show
the message "PLAYING" and the TAD will play it back.
If you have not recorded it, the display will show the mes-
sage "NOT RECORDED".
To change the outgoing message recorded previously or
to record a new one. The display shows:
TO RECORD
To start recording. The display shows:
RECORDING 20
S
ILENT RECEPTION OF INCOMING MESSAGES
Using this function you can receive messages confiden-
tially. In other words, the TAD receives messages without
playing them over the speaker so that any other persons
present cannot hear your messages.
Until the display shows:
TAD SET-UP
The display shows:
ICM ON SPEAKER
The display shows:
ICM SPEAKER:ON
/ To view the other available option: "ICM SPEAKER:OFF".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O PRINT THE TAD CONFIGURATION
PARAMETERS
Until the display shows:
TAD SET-UP
Press the key and then the key until the display
shows:
PRINT TAD SET-UP
To confirm. The display shows:
PRINT OUT:
If the display shows: "PRINT OUT:EXIT", press the
|
/
}
keys to display the option: "PRINT OUT: ".
To start printing. Once this operation has been completed,
the fax machine automatically returns to its initial stand-by
status.