background image

ENGLIS

H

49

E

RROR

 C

ONDITIONS

Clearing an Error

Press 

 to clear an error. The key tone ends, the displays clear and the keypad unlocks, allowing you to continue 

with the transaction.
If an error condition cannot be cleared by pressing 

, reset the cash register by performing one of the cash register 

reset operations.

Out-of-Paper

When the paper runs out, the message 

OUT OF PAPER 

appears on the operator display. Load the paper and press

 to clear the error.

E

RROR

 M

ESSAGES

The following error messages can be displayed:

Error Messages 

Description

OPERATION ERROR

Incorrect key entered. Press 

 followed by 

 to resume operation.

SALES AMOUNT EXCEEDED
OR HALO ERROR

Value entered exceeds that allowed and/or maximum value permitted by HALO
parameter.

ZERO-PRICE ENTRY ERROR

Configuration does not allow zero-value prices.

FULL VOID AMOUNT 
EXCEEDED

Too many sales items entered before a Full Void operation.

CLERK NOT LOGGED IN 

Clerk System is active so Clerk number must be entered.

NO PASSWORD ENTERED

A password must be entered. 

TENDER AMOUNT 
MANDATORY

Entry of amount is configured as mandatory for the type of tender.

PAPER ERROR

Paper roll not inserted correctly.

OUT OF PAPER

Paper finished, refill.

PRINTER HEADER 
TEMPERATURE BECOMES 
ABNORMAL

High printer temperature registered. Wait a few minutes then press 

.

PRINTER CONTROL 
VOLTAGE BECOMES 
ABNORMAL 

High printer voltage registered. Wait a few minutes then press 

.

SD CARD FATAL ERROR

Irrecoverable error on SD Card. Replace card.

SD CARD NOT DETECTED

No SD card detected in slot. Check validity of card in slot. If new, try reformatting.

SD CARD WRITE 
PROTECTION

Data cannot be written onto SD card because it results as write-protected. Remove
write-protection and retry.

SD CARD MEMORY FULL

SD card is full. Replace or clear contents using EJ MEMORY CLEAR option.

SD CARD FILE NOT FOUND

No file found. Check SD card.  

SD CARD READ/WRITE 
ERROR

Cannot read from/write to SD card. If new, try reformatting.

GUEST NUMBER 
MANDATORY

For Table tracking, entry of Guest number is configured as mandatory.

TABLE NUMBER 
MANDATORY

For Table tracking, entry of Table number is configured as mandatory.

ENGLIS

H

Содержание ECR 8200 S













































































Отзывы: