manualshive.com logo in svg

Olivetti d-Copia 1800, Руководство по обслуживанию, Страница: 79 / 297

Поделиться
Скачать
Olivetti d-Copia 1800 Скачать руководство пользователя страница 79

2KL/2KK

1-3-41

U198

Setting the fuser phase control
Description

Sets the use of fuser phase control to reduce electrical noise generated by the machine.

Purpose

Normally no change is necessary. If electrical noise generated by the machine causes flickering of the lights 
around the machine, select fuser phase control to reduces the noise.

Setting

1. Press the start key.
2. Select either "on" or "oFF" using the zoom +/- keys.

Initial setting: oFF

3. Press the start key. The setting is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U199

Checking the fuser temperature
Description

Displays the fuser temperature, the ambient temperature and the absolute humidity.

Purpose

To check the fuser temperature, the ambient temperature and the absolute humidity. 

Method

1. Press the start key.
2. Display each temperature using the exposure adjustment keys.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U200

Turning all LEDs on
Description

Turns all the LEDs on the operation panel on.

Purpose

To check if all the LEDs on the operation panel light.

Method

Press the start key. All the LEDs on the operation panel light. Press the stop/clear key or wait for 10 s.
The LEDs turns off, and the screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Description

on

Fuser phase control present

oFF

Fuser phase control absent

Exposure indicator

Description

Exp. 1

Fuser temperature (

q

C)

Exp. 2

Ambient temperature (

q

C)

Exp. 3

Absolute humidity (%)

Y110980-1 Service Manual 

Содержание d-Copia 1800










































































































































































































































































































Отзывы:

Нет отзывов