Olivetti d-COLOR MF3300, Операции

Страница: 43 / 109

d-Color MF 3300/3800 3-9
3.2 Preparation for SMB Send 3
3.2.3 Machine side: Operations required to use this function (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
Checking the network settings
Print out the Configuration Page, then check that an IP address is assigned to this machine.
To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-
figuration Page].
d
Reference
If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chap-
ter 4 in [Quick Guide].
Configuring the SMB Send environment
Enable the SMB Send function. (You can use this function with the default settings unless otherwise request-
ed.)
For details on the setting procedure, refer to Chapter 2 in [User's Guide Applied Functions].
Tips
In Mac OS X 10.7/10.8, configure the following setting.
- Setting [Authentication] in [SMB Client Settings] to [NTLM v1/v2]
- Enabling the direct hosting SMB service
- Synchronizing the date and time, including the time zone, between the machine and your computer
3.2.4 Option settings
Registering a frequently used destination
Pre-register frequently-used computers and servers as destinations on this machine; it will save having to
carry out many steps in order to enter an address for each transmission.
For details on how to register it, refer to page 10-3.
Using the WINS server
If WINS (Windows Internet Name Service) is used to communicate with a device on the network, register the
WINS server.
For details on the registration procedure, refer to Chapter 2 in [User's Guide Applied Functions].
Using the direct hosting SMB service
When using the direct hosting SMB service to communicate with a device on the network, enable the direct
hosting SMB service. (You can use this function with the default settings unless otherwise requested.)
A communication destination can be specified using the IP address (IPv4 or IPv6) or host name. In the IPv6
environment, be sure to enable this service.
For details on the setting procedure, refer to Chapter 2 in [User's Guide Applied Functions].