Olivetti d-COLOR MF283, Быстрое руководство

Страница: 17 / 190

d-COLOR MF283/MF223 1-9
1.2 Safety information 1
Consumables
Do not use stapled paper, conductive paper (such as silver paper or car-
bon paper) or treated heat-sensitive/inkjet paper, otherwise a fire may re-
sult.
CAUTION
WARNING
Do not throw toner or a container that contains toner (e.g., toner cartridge
and developing unit) into an open flame. The hot toner may scatter and
cause burns or other damage.
CAUTION
Do not leave toner-related parts (e.g., toner cartridge and developing
unit) within easy reach of children. Licking any of these parts or ingesting
toner could damage your health.
Do not store toner-related parts (e.g., toner cartridge and developing
unit) near devices susceptible to magnetism, such as precision equip-
ment and data storage devices, otherwise they may malfunction. They
could cause these products to malfunction.
Do not force open the toner-related parts (e.g., toner cartridge and de-
veloping unit). If toner tumbles from the toner bottle, take utmost care to
avoid inhaling it or even getting skin contact.
If toner lands on your skin or clothing, wash thoroughly with soap and
water.
If you inhale toner, move to a place with fresh air and gargle with a lot of
water repeatedly. Should you get symptoms such as coughing, seek
medical advice.
If you get toner into your eyes, immediately rinse them with running water
for over 15 minutes. Seek medical advice if irritation persists.
If you swallow toner, rinse out your mouth and drink a few glasses of wa-
ter. Seek medical advice if necessary.
Never touch the electrical contacts of the units (e.g., toner cartridge and
developing unit), as an electrostatic discharge may damage the product.
Before handling, see the user documentation for the safety information.
<If instructed to replace the fusing unit>
The fusing section is extremely hot. Before replacing the fusing unit, be
sure to open doors and covers of the machine. Then, leave the machine
to stand idle for a specified period of time and make sure that the fusing
section has cooled down to room temperature. Failure to follow these in-
structions could result in a burn.