background image

XXII. Affixing the paper size label

Affix the paper size label.

For loading the paper as well as setting the paper 
type, refer to the user’s guide.

XXIII. Affixing the label (Legal restrictions 
on copying)

Affix the label (Legal restrictions on copying) to the 
position shown below.

Note:

This step may not be performed depending on the 
applicable marketing area.

XXIV. Adjusting registration of paper 
source options

<1 way paper feed cabinet, large capacity cabinet>
1. Display the Service Mode screen.

(For details of how to display the Service Mode 
screen, see the service manual.)

2. Select the function to be used as follows:

Machine 

 Printer Area 

 Centering 

 3rd.

3. Press the start key.

A test print will be produced.

4. Measure width A from the edge of the paper to 

the pattern printed on the test print and check that 
it falls within the specified range.
Specifications: 3.0 mm ± 1.0 mm

5. If the measured width A falls outside the specified 

range, enter the correction value using the 

 

or  

key.

6. Produce another test print and check to see if 

width A falls within the specified range.

7. Select the function to be used as follows:

Centering (Duplex 2nd Side) 

 3rd.

8. Press the start key.

A test print will be produced.

9. Measure width A of the test pattern on the back-

side of the test print produced and check that it 
falls within the specified range.
Specifications: 3.0 mm ± 2.0 mm

A0EDIXC031DA

Paper size label

A0EDIXE040DA

Label

4061IXC147DA

A

Paper exit
direction

4061IXC152DA

A

Paper exit
direction

Y111050-6  

                                                                 E-

13

    Installation Manual

Содержание d-Color MF280
















Отзывы: