Olivetti d-Color MF201 plus Скачать руководство пользователя страница 175

Страница: 175 / 396

10. Service Mode

Field Service Ver. 1.0 Jun. 2008

160

Adjustment / Setting

(4) Carriage Move

C. Shading Position

D. Test Copy

Functions

• To move the exposure unit to the arbitrary position.

Use

• Used for scanner operation test.
• Used when locking the scanner for transporting the main body.

Adjustment
Specification

<Absolute Position>
• Enter the shift distance (with unit of line) with home position sensor as reference to

move the exposure unit.

+838 to -10748 line (1 line increments)

* Home position of the exposure unit is [-827 line].

<Relative Position>
• Enter the shift distance (with unit of line) with the current exposure unit position as

reference to move the exposure unit.

-9999 to -9999 line (1 line increments)

* It protects to avoid the exposure unit from collision when the result calculated by the

current position and the entered value exceeds the absolute position area.

<Lock Posi.>
Pressing the [Lock Posi.] key moves the exposure unit to the lock position.

Adjustment
Instructions

Enter the + value when moving to the left.
Enter the - value when moving to the right.

Adjustment
Procedure

Call the service mode to the screen.

Touch these keys in this order: [Machine]

[Scan Area]

[BK-S Adjustment]

[Carriage Move].

Select the function and enter the arbitrary shift distance if necessary, and press the
start key.

The exposure unit moves.

Functions

• Not used.

Use

Setting/
Procedure

Functions

• To carry out test copy for adjustment.

Use

• To check the current status, effect, etc, when adjusting scanner area.

Setting/
Procedure

Call the Service Mode to the screen.

Touch [Machine Adjustment]

[Scan Area]

[Test Copy].

Select the proper item for Paper, Simplex/Duplex, Color and Mixed Original, and
press the start key.

The test copy is output.

d-Color MF201

Service Manual Y109660-1

Содержание d-Color MF201 plus












































































































































































































































































































































































































Результаты поиска

Содержание d-Color MF201 plus

Отзывы:

Похожие инструкции для d-Color MF201 plus

Бренды по названию

Популярные бренды

Olivetti d-Color MF201 plus, Руководство по обслуживанию

Результаты поиска

Содержание d-Color MF201 plus

Отзывы:

Похожие инструкции для d-Color MF201 plus

Бренды по названию

Популярные бренды