Oliver Platinum Series Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 61

Oliver Platinum Series Скачать руководство пользователя страница 52

51

IV. Total Hours on Machine and Current Batch Time

The PLC keeps track of how many total hours the machine has been run and how long the current
batch has been running and displays it on the HMI screen. The Total Hours on Machines is a running
total and is never reset. The Current Batch Time resets every time the machine goes from a stopped
to a started state in Automatic Mode.

II. Fan Diagnostics

The next screen used in the Manual Mode is the Motor Diagnostics screen. It is entered by pressing
the Fan Diag button on the Maintenance Screen. See Figure 55.

Figure 55: From Maintenance to Fan diagnostics

That will bring you to a screen that, depending on whether your machine is left or right handed, looks
like Figure 56. The screen will adapt itself so that the order of the fans on the screen matches the
order of the fans in the machine depending on handedness of the machine.

Figure 56: Motor Diagnostics Screen Left and Right Hand

Note: If you have a Retrofit machine, there will only be one fan, and it will not have the amp draw or
fault options because it is not controlled by a VFD. The rest of the sections on the fans do not apply
to a Retrofit machine.

«
...
50
51
52
53
54
...
»

Содержание Platinum Series






























































Отзывы:

Нет отзывов