Oliver Platinum Series, Руководство по эксплуатации, Страница: 46 / 61

45
III. Altering a Stored Recipe
If you find that you have been to change the parameters of a recipe slightly for better results, such
as might happen in a different season with more or less humidity, then you will have to alter an
already created recipe. The first step is the same as that of saving a new recipe. On the Machine
settings screen, press the Save Button as shown in Figure 45. This will take you to the Save Recipes
Screen in Figure 46.
Figure 45: Altering a stored recipe step 1
Figure 46: Altering a stored recipe step 2
Note: if you didn’t load the recipe you wanted to change before you played with the
parameter settings, then go through the section titled Loading a stored Recipe, and then
come back to this point. If you have to do this, make sure you write down the settings you
wanted to save before loading the correct recipe.
Assuming the current recipe name matches the recipe you want to change, check the parameters to
make sure they are the values you want them to be and press the save button to save them to that
recipe. If the name doesn’t match, read the bold faced note just above to get the correct recipe
loaded that you want to change.