Oliver Platinum Series, Руководство по эксплуатации, Страница: 11 / 61

10
machine needs to worry about is the running of the power source to the electrical cabinet. Typical
voltages would be 230V and 460V, three phase, at 60Hz. Other voltages are possible, but need to
be addressed when the order is placed.
Voyager GVX Series Gravity Separator Electrical Requirements
Machine GVX1040 GVX1050 GVX1060
Circuit Size 240V 85 Amps 240V 90 Amps 240V 115 Amps
380V 380V 60 Amps 380V
480V 50 Amps 480V 50 Amps 480V 70 Amps
600V 40 Amps
Maxi-Cap Platinum Gravity Separator Electrical Requirements
Machine 2400P 3000P 3600P 4800P
Circuit Size
208/230V 95 amps 208/230V 95 amps 208/230V 110 amps 208-230V 125 amps
460V 60 amps 460V 60 amps 460V 70 amps 460V 80 amps
Maxi-Cap Platinum Retrofit Gravity Separator Electrical Requirements
Machine 2400U 3000U 3600U 4800U
Circuit Size
Table 1: Model Voltages and Total Amp Draws
NOTE: As of November 1 st 2012, the warranty covering the PLC and VFDs will become void
if the electrician enters the cabinet from the top. The PLC and VFDs will suffer damage if
dust or debris from drilling into the cabinet enters the air vents on the units. The
electrician must enter the cabinet either from the bottom, or from the bottom of either side
panel, below the vents on the VFD. Failure to do this will result in voiding the warranty on
the PLC and the VFDs.
V. Clean Air Source
The Voyager GVX and Maxi-Cap Platinum Gravity Separators require a clean air source in order to
keep the deck from being contaminated by dust blown in through the fans. The air chest comes
supplied with air filters for a machine is that is going to be bolted down to a solid slab foundation. For
those who want to use an external air filtration source, it is also possible to either raise the machine,
or to suspend it over a space where the air is being pumped in. If you need consultation on how to
get clean air to your machine, please call the Oliver team.