Oliver 688-N, Руководство пользователя по эксплуатации и инструкция

Страница: 10 / 39

MODEL 688-N
0688S20004 3-4
WARNING
HOT STEAM ESCAPING WHILE OPENING DOOR CAN CAUSE SEVERE BURNS.
STAND BACK WHILE OPENING DOOR TO AVOID INJURY.
Test Cycle
After completing the Set Up, and Electrical connections, you may wish to run the oven
through a test cycle to verify that everything is ready. Use the following sequence to test
the oven.
•
Turn the main power switch on, (green button). The fan should start.
•
Adjust temperature to 350 degrees F using thermostat. The heat light should
illuminate, then extinguish when oven reaches temperature.
•
Once the oven reaches the set temperature the heating elements should cycle on
and off as indicated by the heat light.
•
The gap between the door and the housing of the model 688 oven is designed to
be the vent for the oven. SOME STEAM MAY ESCAPE THROUGH THE FRONT
DOOR GASKET.
•
Once complete, turn the main power switch off, (red button).