Oliver 641, Руководство пользователя по эксплуатации и инструкция

Страница: 13 / 35

0641S20008 6-2
MAINTENANCE
(Continued)
Removing Scrapers (Continued)
4. Short bottom scraper slide and tip.
(first remove the long top scraper as described above)
a. Grasp the scraper with both hands.
b. Lift up sharply to compress the springs and release the retainer.
At the same time, raise the end of the slide so it will clear the lip of the
transfer tray.
c. Swing the inboard end of the scraper which is furthest from the belt
guard toward the roller.
d. Slide the scraper sideways toward the belt guard until the end furthest
from the belt guard clears the stud assembly.
e. Swing the end furthest from the belt guard away from the roller until the
scraper is in front of the stud assembly.
f. Slide the scraper toward the center of the machine to remove it.
g. When reinstalling the scraper you must lift the retainer plate on the stud
assembly furthest from the belt guard so that the hooked end of the
scraper can slide under the plate and around the stud.
General Notes on Disassembly
1.
DO NOT LOOSEN THE ACORN NUTS OR THE STUD ASSEMBLIES!
They
are factory set to assure proper contact of the scraper tip on the roller.
2. The white nylon scraper tips are easily removed from the scraper bar fro
cleaning by sliding them off with your fingers.
3.
WHEN REINSTALLING THE WHITE SCRAPER TIP, MAKE SURE THE
SMOOTH SIDE OF THE TIP (NOT THE STEPPED SIDE) WILL BE TOWARD
THE DOUGH DURING OPERATION!
Lubrication
1. All bearings are permanently lubricated and do not require further lubrication.
2. Add a drop or two of medium weight food safe oil to the oil cup on the chain
idler arm every 200 hours. The cup is located above the shaft of the main drive
pulley and slightly under the dough hopper casting.
Service
If you properly care for your Oliver Products Company Dough Roller, it will give you long,
trouble free service. If replacement parts are required, order them from the factory. Refer
to the Replacement Parts section of this manual for the item
’s specific part number.