Oliver 641, Руководство пользователя по эксплуатации и инструкция

Страница: 8 / 35

0641S20005 3-2
INSTALLATION INSTRUCTIONS
(Continued)
Optional Stand Mounted
Note: One bottom guard bolt will have to be removed to mount machine to stand.
Select a location for your dough roller which has a level surface, and which has electrical
service compatible with the load the machine will place on it as indicated on the
electrical data plate of the machine.
Position the machine while it is still in its packaging as close as possible to the desired
end location. Expose the machine and stand by removing the outer packaging.
Remove any straps or fasteners securing machine and stand to crate. Machine will only
go on the stand one way. Using at least two people, (one in the front and one at the
back of the machine), lift the dough roller from the resting surface of the packaging and
set the machine onto the stand. Secure to stand using the provided fasteners.
(see page 14-1)
For all Machines
1. Be sure machine is clean and dry.
2. Make sure power switch is in
“Off” position.
3. Check machine nameplate for correct voltage and frequency.
4. Connect machine to a power source that matches nameplate requirements.
5. Switch power
“On” and check for proper operation of the machine.