Oliver 641, Руководство пользователя по эксплуатации и инструкция

Страница: 12 / 35

0641S20008 6-1
641 DOUGH ROLLER
MAINTENANCE
WARNING
ALWAYS UNPLUG THE DOUGH ROLLER BEFORE PERFORMING
ANY TYPE OF MAINTENANCE TASK.
Cleaning
The machine should be cleaned daily, more often during heavy use. Use a damp, soft
cloth on the fixed parts of the machine. Trays and scrapers may be taken to sink for
cleaning.
Removing Scrapers
Remove the scrapers and slides as follows. Reverse the procedures to install them.
1. Long top scraper and tip.
a. Grasp the scraper with both hands.
b. Press down to compress springs and release the retainer.
c. Shift sideways toward the belt guard.
d. Swing the end opposite the guard away from machine.
e. Slide the scraper sideways away from the guard to free the second
end. When reinstalling the scraper make sure the long slot is toward the
belt guard.
2. Long bottom scraper slide and tip.
(first remove the long top scraper as described above)
a. Look under the slide before you attempt to remove it. Note the angles
on the bottom of the slide that hold it in place.
b. To remove the slide grasp it with both hands, one on either side, and
lift sharply to both compress the springs and lift the angles clear of the
pins that support and retain the tray.
c. Pull the tray toward you to remove it from the machine.
3. Short top scraper and tip.
a. Grasp the scraper with both hands.
b. Press down to compress springs and release the retainer.
c. Shift the scraper toward the center of the machine.
d. Swing the end closest to belt guard of the scraper away from the
machine.
e. Slide the scraper sideways away from the center of the machine to
remove it. When reinstalling the scraper make sure the long slot is
toward the center of the machine.
Continued