Oliver 4680, Руководство пользователя

Страница: 5 / 30

5
SECTION 2
：
SAFETY
----------------------------------------------------------------------------------
WARNING
：
For Your Own Safety, Read Instruction Manual before Operating this Equipment
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual
uses a series of symbols and signal words which are intended to convey the level of importance of the
safety messages. The progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
DANGER
：
Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
WARNING
：
Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
CAUTION
：
Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
NOTICE
：
This symbol is used to alert the user to useful information about proper operation of the equipment.
WARNING
：
Safety Instructions for Power Tools
1. Keep guards in place and in working order.
2. Remove adjusting keys and wrenches. Form habit of checking to see that keys and adjusting wrenches
are removed from tool before turning on.
3. Keep work area clean. Cluttered areas and benches invite accidents.
4. Do not use in dangerous environment. Do not use power tools in damp or wet locations, or where any
flammable or noxious fumes may exist. Keep work area well lighted.
5. Keep children and visitors away. All children and visitors should be kept at a safe distance from work
area.
6. Make workshop child proof with padlocks, master switches, or by removing starter keys.
7. Do not force tool. It will do the job better and safer at the rate for which it was designed.
8. Use right tool. Do not force tool or attachment to do a job for which it was not designed.
9. Use proper extension cord. Make sure your extension cord is in good condition. Conductor size should
be in accordance with the chart below. The amperage rating should be listed on the motor or tool