Oliver 4680, Руководство пользователя

Страница: 13 / 30

14
Mounting the conveyor belt
To install the conveyor belt onto the re-saw ：
1. Remove the lag bolts that secure the conveyor belt assembly to the crate pallet.
2. Remove the blade guide from the wheel housing.
3. Lift the conveyor belt onto the resaw body as shown in the right.
4. Line up the holes and insert the carriage bolts .
5. Look under the conveyor for the carriage bolts . Place the flat washers and lock nuts on the carriage
bolts and tighten.
6. Re-install the blade guard in the wheel housing.
Connect power wires
1. Before connecting the power source of your machine to the factory power supply
，
make sure the
voltage
，
Hertz
，
and phase are compatible. The machine is prewar before shipment according to
customers’ requested voltage.
2. The power source connection points are provided inside of the electrical control box
，
located at back
side of the machine. Power wire connection points are marked as “R
，
S
，
T”. The ground wire
connection points are marked “E”.
3. Make sure the machine is properly ground to prevent the danger of electric shock.