OLIVER
IGD
INSTRUCTION DATA SHEET
This product must be earthed in accordance with local safety regulations.
The Control Panel leaves the factory configured for the supply voltage stated on the customers order.
Standard voltage and frequency range is:-
AC Mains Powered
85 to 264 VAC 40 to 400 Hz
DC Low Voltage Powered
18 to 30V DC
Should the control panel be used in conjunction with portable generating equipment, care should be
taken to ensure that the electrical supply is within the tolerance band described above.
The control panel may be stored at temperatures between 0 C and 40 C. If stored at low temperatures
and then brought into a warmer environment, condensation may form on some components. In such a
situation , this condensation should be allowed to evaporate prior to use of the equipment. If stored at
high temperature, care should be taken to ensure that humidity condensation does not enter critical
electrical components, for example the power connector.
The Control Panel is designed to operate within specification for ambient temperature between 5 C
and 40 C, relative humidity up to 90% ( non-condensing ).
Do not use a Control Panel for protection applications that has not been calibrated. If calibration seals
are missing from the control panel or have been tampered with or broken, then the control panel must
be re-calibrated and sealed by a trained engineer..
Power Source
85 to 264 VAC (18 to 30V DC Option)
Power Consumption
40 Watts
Display
2 x 16 backlit LCD
Operating temperature
0 Deg C to 50 Deg C
Operating Humidity
up to 95% Non Condensing
Accuracy
+/-0.5% FSD
Resolution
1% of FSD
Response Time
T90 in under 2.5s
Update Rate
1 Second
Size
255H x 265W x 100D mm
Weight
5.1Kg
Inputs
8 of 4-20mALoops
1 of RS 485 Comms Port
1 of RS 232 Comms Port
1 of RS 485 Detector Data Highway (Addressable Versions)
Outputs
3 off Configuable SPCO Relays 7ANon Inductive Load
1 off Fault Relay 7ANon Inductive Load
1 offAudio/Sounder Output SS 24V DC
1 Off Visual/Flasher Output SS 24V DC
CE Declaration
Conforms to the requirements of the CE and low voltage
equipment directive. See declaration CE-700-03
0
0
o
o
warning !
