Olimpia splendid Ci2 Wall Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 54 / 132

ENGLISH
EN - 22
SYMPTOM 4: Noise during cooling
a. The appliance emits a low and continuous noise, like hissing, in cooling mode or when stopping.
This noise is caused by operation of the drain pump (optional accessory).
b.
The appliance emits a squealing noise, like a squeak, when the system stops after operation in heating mode.
This noise is caused by the expansion and contraction of the plastic parts due to temperature changes.
SYMPTOM 5: Dust escaping from the appliance
a. This occurs when the appliance is used for the first time after a long period of time and depends on the
accumulation of dust inside the appliance
SYMPTOM 6: THE appliance gives off odours
a.
The appliance can absorb the odour of rooms, furniture, cigarettes, etc. and return them to the environment.
4.4 - ERROR CODES
During the appliance functioning, a few anomalies which stop its functioning could appear.
In these cases, some error codes appear on the control panel.
• EE Malfunctioning of the DC motor
• E3
Malfunctioning of the evaporation sensor T2
• E2
Malfunctioning of the evaporation sensor T1
• E8
Malfunctioning of the water level alarm
• E7
EEPROM communication error
In these cases:
a.
electrically disconnect the appliance
b.
wait a few minutes
c.
connect the plug to the power socket
d.
restart the appliance.
If the inconvenience persists and the error code doesn’t turn off, electrically disconnect the
appliance and refer to an Assistance Centre.