Olicom Ethernet MCA 10/100 Adapter, Руководство по эксплуатации

Страница: 37 / 88

30
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 Software Installation
3. Insert the following line in the file AUTOEXEC.BAT:
OCE3XODI
OCE3XODI must be loaded after LSL, but before any protocol stacks (for
example, IPXODI).
Sample AUTOEXEC.BAT:
LSL ( Link support module, Novell supplied)
OCE3XODI (Ethernet ODI driver)
IPXODI (IPX/SPX Protocol module, Novell supplied)
NETX (NetWare Requester, Novell supplied)
Other protocol stacks and requesters are possible. See the Novell NetWare
documentation.
4. Edit the NET.CFG file, if desired, to configure the workstation. See the Novell
documentation provided with the ODI Shell for general information about the
NET.CFG file.
Sample NET.CFG:
# Start of NET.CFG
# Two adapters, with both SNAP and 802.2 support
# and with locally assigned node addresses:
Link driver OCE3XODI
Port 300
Speed 100
Duplex Auto
Node address 060011110002
Frame Ethernet_802.2
Frame Ethernet_SNAP
Link driver OCE3XODI
Port 340
Duplex Auto
Node address 020011110001
Frame Ethernet_802.2
Frame Ethernet_SNAP
# End of NET.CFG
The line “Link Driver ...” must begin in the first column and the parameters that
follow must be indented.