Olicom Ethernet MCA 10/100 Adapter, Руководство по эксплуатации

Страница: 32 / 88

25
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 Software Installation
Microsoft Windows for Workgroups 3.11
With Windows for Workgroups 3.11 the following configurations can be used:
–
NDIS 2.0 driver
–
ODI driver
If access to a Novell server is required, see “Microsoft WfW 3.11 ODI Installation”
in the Olicom online documentation.
Install NDIS Driver
The installation is done by adding the driver from the Olicom Driver Disk.
1. Select the “Network Setup” icon from the “Network” window.
2. In the “Network Setup” panel click the “Networks...” button.
3. Select “Install Microsoft Windows Network” and make sure the “No additional
network” radio button is selected.
4. Click the “OK” button or press Enter .
5. Click the “Drivers...” button.
6. If you are replacing a previous LAN adapter, select the “Remove” button to
delete that adapter.
7. In the “Network Drivers” panel click the “Add Adapter...” button.
8. Highlight the “Unlisted or Updated Network Adapter” choice and click the
“OK” button.
9. The setup program prompts for a vendor-provided network driver disk. Insert
the Olicom Driver Disk, change the path specified to “A:\” and click “OK”. If
the Olicom Driver Disk is located in another directory or drive, enter the
correct path or use the “Browse” function.
10. In the “Unlisted or Updated Network Adapter” panel, select “Olicom Ethernet
MCA 10/100 Adapter (OC-2335)” and click “OK”.
11. If you need to change any driver parameters, highlight “Olicom Ethernet MCA
10/100 Adapter (OC-2335)” and click the “Setup...” button in the “Network
Drivers” panel.
12. If you want to change any of the parameters for the NDIS driver, click the
“Advanced...” button.
a) Highlight the parameter you wish to change and enter a value in the box
below the parameters or select the “Not present” button if the parameter should
be omitted from PROTOCOL.INI.
b) Click the “Set” button when the parameter is correct.
c) Click the “OK” button when all parameters have been set correctly.