Olicom 710001414, Руководство по эксплуатации

Страница: 36 / 88

29
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 Software Installation
Novell NetWare Workstations
If the Novell NetWare version provides installation support for Olicom adapters
and drivers, use the native NOS installation utility. Otherwise, proceed with the
relevant section in this chapter.
With Novell server operating systems up to version 3.11, Novell shipped the
NETX client software. With versions 3.12 and 4.x, Novell ships the VLM client
software. While both may be used, the VLM client is required if you want to take
advantage of the new functionality in version 3.12 and 4.x servers.
NetWare DOS ODI Workstations
VLM Installation
For installation of the NetWare DOS/Windows 3.x VLM client, run the NOVELL
install program. When the installation requests the driver diskette, insert the
Olicom Driver Disk supplied with the adapter and select the OCE3XODI driver.
The NET.CFG file is generated by the Novell install program.
The VLM (Virtual Loadable Module) client is loaded using the following
sequence of commands:
LSL.COM (Link support module, Novell supplied)
OCE3XODI.COM (Ethernet ODI driver)
IPXODI.COM (IPX/SPX Protocol module, Novell supplied)
VLM.EXE (NetWare Requester, Novell supplied)
If you let the install program modify your CONFIG.SYS and AUTOEXEC.BAT
files, these commands are automatically executed during boot.
NETX installation
This installation procedure requires the following software and documentation:
•
Novell NetWare DOS ODI support programs
•
Olicom Driver Disk
1. Copy the Novell NetWare DOS ODI support programs to a disk as explained in
the Novell documentation.
2. Copy the OCE3XODI.COM driver to the same disk as the Novell NetWare
DOS ODI support programs:
COPY A:\DOS\OCE3XODI.COM C:\<path>