Olicom 710001414, Руководство по эксплуатации

Страница: 16 / 88

9
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 Hardware Installation
MCA Adapter Configuration
1. Turn power off and insert disk in drive “A” the backup copy of the
REFERENCE/USER diskette that came with your computer.If you have not
yet made a backup copy of the REFERENCE/USER diskette, do so by
selecting the “BACKUP THE REFERENCE DISKETTE/COPY USER
DISKETTE” function from the MAIN MENU on the original diskette.
2. Turn power on to start the PC from the diskette and wait for the MAIN MENU
to appear.
➽
Note: Do not at this stage choose to run an automatic configuration as you are
prompted to do!
3. Select the “COPY OPTION DISKETTE” function and follow the instructions.
4. When prompted for an option diskette, insert the Driver diskette that came with
the Ethernet MCA 10/100 Adapter.
When the adapter description file has been copied onto you REFERENCE/
USER diskette, you are returned to the MAIN MENU.
5. Select the “SET CONFIGURATION” function to invoke the configuration
menu.
6. Select “RUN AUTOMATIC CONFIGURATION”.
The default settings are: I/O address location: 200h, interrupt level: IRQ2, and
RPL: RPL disabled.
Select the “VIEW CONFIGURATION” function from the SET
CONFIGURATION menu if you want to know the exact settings.
➽
Note: If you are installing to NetWare 3.12, NetWare 4.x, or Windows 95, select
the “VIEW CONFIGURATION” function from the SET CONFIGURATION
menu. Make a note of the slot number, as you will need it later.
You may now proceed to chapter 7 to install the driver software.
❏