Oleo-Mac GS200E Скачать руководство пользователя

Страница: 25 / 202

RUS

TRANSLATION OF ORIGINAL INSTRUCTIONS

INTRODUCTION

For correct use of the machine and to avoid
accidents, do not start working until you have
read this manual carefully. You will find
explanations concerning the operation of the
various parts plus instructions for necessary
checks and relative maintenance.
NOTE: The descriptions and illustrations
contained in this manual are not binding.
The manufacturer reserves the right to
under take any modifications it deems
necessary without revising this manual.
In addition to the operating instructions, this
manual contains paragraphs that require your
special attention. Such paragraphs are marked
with the symbols described below:
WARNING: where there is a risk of an accident
or personal, even fatal, injury or serious damage
to property.
CAUTION: where there is a risk of damaging the
machine or its individual components.

WARNING

RISK OF HEARING DAMAGE

IN NORMAL CONDITIONS OF USE, THIS MACHINE

MAY EXPOSE THE OPERATOR TO A PERSONAL DAILY

NOISE LEVEL EQUAL TO OR HIGHER THAN

85 dB (A)

CONTENTS

1. EXPLANATION OF SYMBOLS AND

SAFETY WARNINGS _______________ 21

2. ELETTRIC SAW COMPONENTS ______ 22

3. SAFETY PRECAUTION _____________ 22

4. FITTING THE BAR AND CHAIN _______ 26

5. STARTING _______________________ 27

6. STOPPING THE ENGINE ____________ 28

7. USE ____________________________ 28

8. MAINTENANCE ___________________ 30

9. STORAGE ________________________ 32

10. TECHNICAL DATA _________________ 33

11. DECLARATION OF CONFORMITY ____ 34

12. WARRANTY CERTIFICATE __________ 35

13. TROUBLE SHOOTING CHART _______ 36

1. EXPLANATION OF SYMBOLS AND

SAFETY WARNINGS (Fig.1)

1. Read operator’s instruction book before

operating this machine.

2.  Wear head, eye and ear protection.
3.  This symbol indicates Warning and Caution
4.  Immediately disconnect the plug if the

cable is damaged or cut

5. Do not expose the electric saw to rain or

high humidity conditions

6. Chain rotation direction - Maximum cutting

length

7. Double insulation device
8. Specifications
9. Type of machine: ELECTRIC CHAIN SAW.

10.  Guaranteed sound power level
11. Serial number
12.  CE conformity marking.
13.  Year of manufacture

USER INFORMATION

In accordance with Directives
2011/65/CE and 2012/19/CE
on the reduction of hazardous
substances in electrical and
electronic equipment (ROHS)
and the disposal of waste from
such equipment (WEEE)

When the symbol depicting a crossed-out
refuse bin appears on equipment, this means
that it must be collected separately from other
waste at the end of its working life.
When the equipment is no longer serviceable,
accordingly, it should be taken by the user to
a special sorted collection centre for electrical
and electronic waste, or if purchasing a new
product of similar type, returned to the
dealer on a one-for-one basis (takeback
scheme).
Proper sorted collection ensures that the
discarded equipment can be sent subsequently
for eco-friendly recycling, treatment and
disposal; this helps to avoid any possible
negative impact on the environment and
on health, besides enabling the reclamation
of materials used in manufacturing the
equipment.
U n a u t h o r i z e d d u m p i n g o f w a s t e i s
irresponsible, and punishable under statutory
regulations.