Oldham SharpEye NP40IGB, Руководство пользователя, Страница: 23 / 50

24
•
When using the optional tilt mount, use flexible conduits for the last portion
connecting to the detector.
•
For installations in atmospheres as defined in group B of the NFPA 72E, seal the
conduits inlets.
•
When pulling the cables through the conduits, ensure that they are not tangled or
stressed. Extend the cables about 30 cm. (12 in.) beyond the detector location to
accommodate wiring after installation.
•
After the conductor cables have been pulled through the conduits, perform a
continuity test.
2.6 Installing the Tilt Mount (ref. B103888)
The Tilt Mount enables the detector to be rotated up to 60º in all directions.
Figure 4 shows the Detector mounted on the Tilt Mount.
Figure 4: Detector with Tilt Mount