Oldham MX62, Руководство пользователя

Страница: 11 / 74

Page 11
1. Presentation
WinPro
®
/ MX62 is a stationary control system to be used in combination with a
variety of detectors for continuous detection of combustible gases, toxic gases
and oxygen.
Main features are a high reliability and flexibility. The flexibility refers to all
areas, as there are free programmability, installation of relay and analog output
modules and the optional installation in wall-mounted housings, 19 inch racks or
control panels.
The modular components allow extension for up to 64 channels, 128 relays, 64
analog outputs and the optional use of an LCD module with data logger or
profibus module, making the gas detection system suitable for all applications.
The complete system and all required modifications can be set by the software
ConfigPro . This software is detailed separately.
2. System configuration
The system consists of a controller module plus various other modules linked by
digital busses. The basic configuration is as follows:

Analog input module (AEM)

Controller module (CM)

LED module

LCD or logo module
The AEM converts the 4-20 mA signal of the detectors into digital bus signals to
be transmitted to the CM. In the CM the signals are evaluated and separately
indicated for each channel according to the respective presettings.
One AEM and one LED module are designed for eight channels each.
The CM can directly be employed for 64 channels on different input and output
modules.
In addition the following modules can be integrated into the system as required:

Basic relay module (RBM)

Extension relay module (REM)

Analog output module (AAM)

Loop module (LOOPM)

LCD data logger module