![background image](http://html1.mh-extra.com/html/oldham/denchi-power-gl9/denchi-power-gl9_instruction-manual_3717531007.webp)
7
Replacing the lock barrel
If the lock barrel is damaged it may become difficult
to connect the lamp to the charger. In this case, the
lock barrel must be replaced
Use 201520 (M204683) lock contact spares kit.
1. Undo the M4 lock nut and remove the dome-
head screw that runs through the charging
contact housing.
2. The metal cap-clip can be lifted off and set to
one side (take care not to lose the spring clip).
3. Remove the lock barrel and ensure that the
charging contact housing is clear of any debris
before inserting the replacement lock barrel.
4. Holding the lock spring in position, refit the cap-
clip cover, insert the dome-head screw and re-
tighten the M4 lock nut.
Содержание Denchi Power GL9
Страница 9: ...9...