Okuma OSP 5000, Электротехническое обслуживание, Учебное пособие

Страница: 60 / 286

4-11
Okuma America Corporation
Machining Center Machining Center
Machining Center Machining Center
Machining Center
Rev. 8-21-01
The following is an outline of the menus associated with the different operating modes on the
Machining Center (OSP 5020) control.
AUTO Mode
PROGRAM
SELECT
ACTUAL
POSIT
PART
PROGRAM
BLOCK
DATA SEARCH ATC/APC CHECK
DATA
EXTEND
F1 F2 F3 F4 F5 F6 F7 F8
Used to
select a part
pro-gram for
a desired cut-
ting
operation Used to
display
coordinates
of the actual
position of
the axes in
relation to the
zero offset
Used to
display a
part
program Used to
display the
data in one
BLOCK
DATA Used to
search for
particular
Check
Data
screen Used to
display the
status of
the ATC
or APC Used to
display
I/O signals
and
various
other data Used to
access
other
menus
LIBRARY
P. SET
TOOL
DISPLAY
PERSONAL DIAGNOSIS
AXIS
CHANGE
MESSAGE
EXTEND
F1 F2 F3 F4 F5
F6 F7 F8
Used to
store
library
programs
which are
basically
sub-
routines. Used to
display the
tool data
page. Used to
display
print data. Used to
display
any
messages
pertaining
to the
ATC or
APC. Used to
display
data the
individual
axes. Used to
display
any
messages. Used to
access
other
menus
NUMBER
SEARCH RESTART NUMBER
STOP SP
SELECT SP - NO.
SEARCH
EXTEND
F1 F2 F3 F4 F5 F6 F7 F8
Searches
for a
sequence
number Prepares
for a
sequence
restart Stops at a
number
sequence Selects a
scheduled
program. Searches
for a
scheduled
program
number Used to
return to
first menu
Graphics option
G